If you’ve ever pulled back the sheets and spotted a smudge that wasn’t there last night, then suddenly discovered a constellation of itchy bites, you know the special panic that only bed bugs inspire. They don’t care about your housekeeping, your zip code, or your sleep schedule. They feed, hide, and hitchhike. And once they’re in, they’re stubborn. The good news is that professional treatment works when the home is properly prepped. The difference between one fierce treatment and a long, expensive saga usually comes down to preparation.
I’ve helped prep studio apartments, rambling Victorians, and everything in between for successful bed bug removal. The patterns repeat. People who prepare well cut down treatment time, reduce the number of follow-up visits, and get their lives back faster. People who wing it, or worse, move infested items around in a panic, end up chasing bugs from room to room. Let’s keep you in the first group.
How bed bugs behave, in plain terms
Bed bugs don’t live in dirt. They live near you. The heat and carbon dioxide you give off at night draw them, so they concentrate around beds, couches, and chairs. They wedge into seams and gaps as thin as a credit card: mattress piping, headboards, baseboards, the hollow of a metal bedframe, even inside a loose screw hole. They avoid light and scatter if threatened, which is why unplanned cleaning sprees can spread them.
They also ride. That clutch handbag tossed onto a couch, the throw blanket that migrated to the guest bed, a rolling office chair picked up secondhand, the suitcase from a weekend trip, these are common highways. In multi-unit buildings, they may exploit wall voids, shared laundry, or hallways. Your job before treatment is to deny them hiding places and reduce the chance of escape when the professionals turn up the heat or apply targeted products.
The first 48 hours after discovery
Take a breath. Sleep somewhere you can still be treated, ideally your bed with white sheets so you can monitor. Do not start sleeping on the couch. You’ll only give them a fresh cafeteria and widen the battlefield. Avoid dragging blankets into other rooms. Avoid throwing away mattresses or furniture unless a licensed pro confirms they’re beyond salvage. I’ve watched more than one professional cleanout services near me client spend thousands replacing everything, only to reinfest the new items because the baseboards and bed slats were still harboring live bugs and eggs.
If you have a scheduled visit with bed bug exterminators, ask exactly what method they’ll use. Heat, chemical, or a hybrid approach each calls for slightly different prep. If you don’t have someone booked yet, search for a licensed provider with bed bug removal as a core service, not a sideline. Reviews matter, but so does the consultation. A competent company will ask detailed questions and provide a written prep checklist. Some firms partner with junk removal or cleanout companies to streamline the process, which can be a lifesaver if you’re staring at a storage unit disguised as a guest room.
Sorting the room without creating chaos
Pre-treatment sorting is where many infestations “jump.” The rule is simple, and I cannot overstate it: only move items out of an infested room if you can seal them fully, and only after you’ve decided their fate. Clothes, linens, and soft goods can often be saved with heat, either through a dryer or the treatment itself. Paper, books, and electronics take finesse, but they can be handled. Piles on the floor, stacks under the bed, and cluttered nightstands must be thinned so the technician can reach baseboards and furniture seams.
Aim to create four zones within the room, even if that means taping off areas on the floor. Keep these zones distinct so you don’t blend clean and questionable items:
- Keep and treat: Items that will stay in the home and can ride out treatment, like bed frames, mattresses, solid wood furniture, and sealed containers. Bag and launder: Washable soft goods that can go straight into sealed bags, then to laundry. Bag and isolate: Items that can’t be laundered but need to be sealed for later inspection or treatment, like books or certain decor. Discard: Items too damaged, too infested, or too cheap to justify treatment, like a torn foam pillow or a delaminating pressboard nightstand.
Those four labels guide everything. Resist the urge to create a fifth category called “miscellaneous.” That’s where bugs stow away.
Dealing with the bed, the star of the show
Your bed is ground zero. Strip it carefully. Pull sheets slowly toward the middle to avoid flinging eggs from the edges. Stuff bedding directly into heavy-duty contractor bags, not thin grocery bags that rip and leak air. Tie each bag tight and set it into a second bag if there’s any doubt. Do the same with pillows and bed skirts. Bag them in the bedroom, not in the hallway or laundry room. The pathway matters because bed bugs can drop off like tiny paratroopers.
If your mattress is in good shape, it can usually be saved and encased after treatment. A high-quality, zippered bed bug encasement turns a mattress and box spring into a smooth shell, denying hiding places and trapping any stragglers inside where they eventually die. Encasing now is tempting, but wait for your exterminator’s advice. Some prefer to inspect and treat first, then encase at the end.
Check the frame. Wood frames often have cracks; metal frames have hollow tubes and bolt holes. I’ve found bugs nesting inside hollow metal legs, visible only when you unplug the end caps. If you have a headboard attached to a wall, plan to pull it away a few inches before the technician arrives. The aim is access without relocation. We want everything in its original room, only more open and less cluttered.
Laundry, handled like evidence
Laundry is the simplest way to kill bed bugs at home, but it’s also the easiest way to scatter them if you cut corners. Heat is your friend. Temperatures of roughly 120 to 140 degrees Fahrenheit kill all life stages when sustained, and most dryers can reach lethal conditions within 20 to 30 minutes, provided you don’t overload them.
Create a bag staging area a few steps from your washer and dryer. Carry bags directly from the bedroom to that spot. Do not open bags in common areas or set them down on sofas. At the machine, open the bag like a sleeve so the contents slide straight into the washer or dryer, then knot the empty bag and dispose of it outside. If you can, dry first on high for 30 to 40 minutes to knock out live bugs, then wash and dry again as fabric care allows. If fabric can’t tolerate high heat, consult your pro about alternatives.
Fold clean items away from living spaces, preferably into new, clean bags or lidded plastic bins. Label them clearly. I like blue tape and a Sharpie: “Bedroom 1 - Shirts - Clean.” Stack these in the room that was treated, not in a different room. Yes, it feels counterintuitive. But dragging “clean” items through untreated rooms risks cross-contamination, and the treated room will be the safest space soon.
Clutter control without an identity crisis
Clutter is the best friend bed bugs ever had. That basket of magazines by the bed, the nest of cables behind the nightstand, the quilts you inherited that now live under the bed in a soft-sided zip case, each of these is prime real estate. The solution isn’t to panic and ditch heirlooms. It’s to switch to hard-sided containers with gasket lids or quality zipper totes that can be sealed and labeled.
I’ve seen clients spend a weekend shoving everything into cardboard boxes. That’s an upgrade from open piles, but it’s still risky. Bugs happily tunnel into corrugated cardboard. If you use boxes temporarily, line them with contractor bags first and seal the bags after filling. Better yet, invest in a few stackable plastic totes in sizes you can actually carry up stairs. Keep them only half to two-thirds full so you can lift safely and seal the lids cleanly.
If you’ve been thinking about junk cleanouts, this is a strategic time to call a residential junk removal service. Broken chairs, stained rugs, a wobbly bookcase that never got fixed, these reduce access and create hiding spots. A reputable junk hauling crew can clear volume fast while you focus on what stays. Flag items that might harbor bugs and ask the crew to follow sealing protocols. If you’re searching phrases like junk removal near me or cleanout companies near me, prioritize teams that have bed bug protocols and will haul directly from the infested room to the truck without staging in hallways.
Furniture triage, with a practical eye
Solid wood furniture, especially with simple joinery, can be treated and kept. Laminate furniture that’s swelling at the edges or peeling can be tough because delamination creates endless crevices. Upholstered pieces live somewhere in the middle. A high-quality couch is often worth saving with a professional heat treatment, particularly if it’s part of a whole-home plan. A thrift-store ottoman stuffed with straw or torn foam may not be.
If you do discard, mark large items clearly as infested so no one adopts them from the curb. Slash or remove cushions and cut fabric to prevent scavenging. Tape or tag items so haulers know not to shoulder them unbagged through common areas. Some jurisdictions have rules about wrapping mattresses and box springs before disposal. Ask your exterminator or your local waste authority before trash day. A residential demolition or commercial demolition crew is overkill for typical furniture, but a demolition company can help if you’re removing built-in platforms, stage risers, or wall panels that harbor entrenched infestations.
Electronics, books, and the delicate stuff
Electronics don’t like heat and don’t swim in soapy water. Thankfully, most bed bug activity clusters within a few feet of sleeping areas, so your kitchen blender probably isn’t harboring a colony. Laptops and nightstand alarm clocks, on the other hand, deserve attention. Power down, unplug, and place them in labeled plastic bags or totes. Some professionals use portable heat chambers for electronics at safe temperatures. Do not try to bake your laptop in an oven, a car, or under a blanket with a space heater. That’s a good way to turn a pest problem into a fire report.
For books and papers, avoid fanning or flipping pages aggressively. Slip stacks into sealable bags or totes and label by room. Depending on the treatment, your pro may advise leaving them boxed in the room so ambient heat or residual products can do their job. If an item is priceless, like a first edition, discuss nitrogen treatments or specialized methods. For most paperbacks and photo albums, careful sealing and patience suffice.
Vacuuming that actually helps
Vacuuming is helpful if you do it with purpose. Use a vacuum with a bag and a crevice tool. Work seams, tufts, and edges slowly, especially around the bed. Vacuums don’t kill eggs reliably, and they won’t solve an infestation alone, but they reduce live pressure. When you’re done, remove the vacuum bag immediately, seal it in a plastic bag, and take it outside to a sealed bin. If you have a bagless vacuum, empty the canister into a bag outdoors, then wash the canister and filter housing with hot, soapy water. Never share a vacuum between infested and non-infested units without cleaning it.
Steam is another tool, but it takes training. The right tip, temperature, and speed matter, otherwise you just blow bugs elsewhere with hot air. If you have a professional-grade steamer with a wide head and a cloth cover and you know how to keep the head above 200 degrees at the point of contact, you can make a dent on seams and baseboards. For everyone else, leave steam to the pros to avoid scalds or moisture damage.
Sealing, chalking, and giving nowhere to hide
Your future self will thank you for a Saturday spent with a tube of caulk. Baseboard gaps, trim seams, cracks where pipes penetrate, and gaps around outlets give bed bugs harborage and pathways. Caulk the visible cracks and reduce clutter catching points like peeling wallpaper edges. If you’re in a multi-unit building, talk to management about shared walls and utility chases. Even the best unit prep can falter if your neighbor’s untreated infestation bleeds into your apartment through a gap behind the stove.
Outlet covers can be removed for inspection, then reinstalled. Don’t slather caulk into the electrical box. If you see signs inside, document it and tell your exterminator. They’ll have dust formulations for those voids. Simple door sweeps help contain bugs to the treated room. Think of it as staging a perimeter without turning the place into a caulk sculpture.
Pets, plants, and the living things that aren’t invited to treatment
Fish, reptiles, birds, and small mammals are sensitive to certain products, even when used correctly. Inform your pest control company about your menagerie ahead of time. Plan temporary housing for aquariums and terrariums in a safe space per the company’s guidance. For dogs and cats, most treatments only require temporary removal with return after a given airing time, but rules vary.
Houseplants usually don’t harbor bed bugs, but they can act as vehicles if you brush them against infested curtains or bedding. If heat treatment is planned, discuss plant safety. Many species can’t tolerate elevated temperatures and should be relocated before equipment arrives.
What to expect from heat versus chemical, and how prep differs
Heat treatment changes the physics of your home for a day. Technicians bring in heaters and fans, sometimes large propane or electric units, and monitor temperatures to bring your space into the kill zone for several hours. Preparation for heat focuses on airflow and safety. You’ll be asked to remove aerosols, candles, makeup that melts, certain electronics, and anything that warps or explodes under heat. You’ll also be asked to pull furniture a few inches from walls, open drawers, and loosen stacks so air moves freely. The upside is speed and minimal chemical residue. The downside is cost, and heat requires thoroughness to reach deep harborage. Good teams will rotate items and use probes to verify temperatures at the core, not just ambient heat.
Chemical or hybrid treatments rely on a suite of targeted products, including insect growth regulators, desiccant dusts, and contact sprays. Preparation here centers on access. Rooms must be decluttered, baseboards clear, bed frames open, and drawers empty or neatly staged for inspection. You should expect a follow-up visit or two as products take time and bed bugs have staggered life stages. While residues are designed to target pests and be safe when used as labeled, follow reentry and cleaning instructions. Don’t immediately mop away protective barriers, but also don’t live with puddles. A good provider will explain where they placed what, and why.
Managing multi-room or whole-home situations without losing control
It’s common to find bugs in more than one room, especially if the infestation has been present for months. People start sleeping on the couch to escape bites. Guests bring a bag to the office. Children drag blankets to a gaming nook. That’s understandable, but it widens the problem. When multiple rooms are involved, the plan becomes choreography.
Schedule treatment for all affected rooms in one sweep if possible. Prep each room the same way: sort, bag, launder, open access, and seal outbound pathways. Close doors after prep. Do not ferry items between rooms except in sealed bags on a direct route. If you absolutely must sleep in a different room before treatment, isolate the bed by moving it away from the wall, placing interceptors under the legs, and using encased bedding. Keep that room as spartan as a hotel bed, and resist adding piles of clothes or plush decor.
For condos, townhomes, and apartment buildings, loop in property management early. Coordinated schedules across units save everyone heartbreak. Bed bugs do not respect drywall. I’ve seen perfect prep stall because the neighboring unit had a headboard screwed into a shared wall, with the void alive with activity. Remember, it’s not blame, it’s biology.
Handling offices, retail spaces, and commercial environments
Bed bugs love upholstered lobby chairs and breakroom couches almost as much as they love your bedtime. Office cleanout is not a term most managers connect with bed bugs, but it matters. If you discover bugs at work, resist knee-jerk disposal that sends bugs down the elevator to a new address. Commercial junk removal crews should bag or wrap items in place. Office cleanout teams must coordinate with pest control to avoid moving infestations into trucks, warehouses, or donation streams.
For retail or hospitality, the stakes include reputation and regulatory oversight. A commercial demolition project is rarely necessary, but strategic removal of platforms, wall fabric, or built-ins might be. That’s when a demolition company near me search should lead you to a licensed demolition company that understands containment and can work alongside pest technicians without blowing dust and debris through an ongoing treatment area.
When to bring in help for the heavy lifting
If your home has drifted from “lived-in” to “where did the floor go,” you’re not alone, especially after a move, a loss, or years of accumulating. Bed bug prep feels impossible in a packed space. That’s where estate cleanouts and basement cleanout or garage cleanout services earn their keep. A coordinated plan works best. The pest company outlines where bugs concentrate. The cleanout crew safely bags, moves, or discards under those rules. They don’t have to be entomologists, but they must follow a protocol: seal before moving, avoid common area staging, and clean tools between jobs. Ask them how they prevent cross-contamination. If the answer is a shrug, find another crew.
The two essential checklists
Pre-treatment essentials, short and sweet:
- Bag textiles at the bed, tie tight, and move directly to laundry or sealed staging. Open access: pull furniture from walls a few inches, empty nightstands, and clear baseboards. Switch to hard-sided, sealable containers for anything that stays in the room. Mark discards as infested, wrap them, and move them out in sealed fashion on hauling day. Coordinate pets, plants, and heat-sensitive items with your exterminator’s written guidance.
Post-treatment habits that keep you bite-free:
- Keep encasements on mattresses and box springs for at least a year. Use bed leg interceptors for monitoring and check them weekly for the first month. Avoid reintroducing clutter around sleeping areas, especially under-bed storage. Quarantine incoming items, particularly secondhand furniture, before they cross your threshold. If bites recur, capture evidence on white sheets or tape and call your provider promptly.
A quick reality check on cost and time
People ask for exact numbers, but the honest answer is ranges. A single-bedroom heat treatment might run from the low four figures to more, depending on square footage and layout. A chemical treatment course can be lower upfront, though follow-ups add to the total. Add-ons like junk hauling, mattress encasements, and interceptors are practical investments. What consistently saves money is thorough prep. A technician who spends the first hour moving piles and clearing floors is not applying their expertise where it counts.
Cleaning up clutter isn’t glamorous work, but it has leverage. I watched a client with a studio apartment cut their treatment plan from three visits to two by spending a weekend bagging textiles, switching to totes, and removing two broken bookshelves that were shedding laminate like confetti. Another client in a three-bedroom home worked with a residential junk removal team for one morning, then had a single comprehensive heat treatment. They kept their heirloom bed, bagged their library, and never saw another bite.
Don’t spread the problem while you fix it
One last word of caution. Bed bugs inspire shame. Don’t let that push you toward secrecy that hurts your circle. If you commute with a backpack that lives on your bed, consider a hard-sided bag you keep by the front door. If your child brings stuffed animals to school, bag and launder their favorites and rotate in clean substitutes while treatment runs. If you host clients at home, pause those meetings for now.
In multifamily buildings, tell your neighbors and management without drama. It’s not a moral failing, it’s a maintenance issue. The building solves this faster together than in a whisper network that pushes bugs along hallways.
Bringing the home back to normal
After a successful treatment, the path back to normal is measured in small comforts. Fresh sheets on an encased mattress. A night without scratching. The satisfaction of tossing the last contractor bag because all the laundry is back in drawers. Keep interceptors under the bed legs for a few months to verify the quiet. Maintain your new habits: minimal under-bed storage, sealed containers for off-season fabrics, caution with secondhand treasures. If you buy used furniture, stage it in the garage or on a porch, inspect with a flashlight, and consider a precautionary treatment before it earns a spot in the bedroom.
And if you ever find yourself planning a renovation, consider bed bug defense while you’re at it. Simple bed designs with few crevices, solid surface floors instead of wall-to-wall carpet in bedrooms, sealed baseboards, even a metal bedframe that’s easy to inspect and wipe down. You don’t have to live in a laboratory, just a space that denies pests the nooks they crave.
Treat the prep as part of the cure, not a chore on the way to it. With a steady plan, a few smart calls to pros who know their roles, and a little patience, you’ll evict the tiny vampires and get your sleep back. That first silent morning when you wake up bite-free, you’ll appreciate every labeled tote, every sealed bag, every baseboard that no longer has a shadowed gap. That’s not just bed bug removal. That’s peace of mind, restored.
Business Name: TNT Removal & Disposal LLC
Address: 700 Ashland Ave, Suite C, Folcroft, PA 19032, United States
Phone: (484) 540-7330
Website: https://tntremovaldisposal.com/
Email: [email protected]
Hours:
Monday: 07:00 - 15:00
Tuesday: 07:00 - 15:00
Wednesday: 07:00 - 15:00
Thursday: 07:00 - 15:00
Friday: 07:00 - 15:00
Saturday: Closed
Sunday: Closed
Google Maps: https://www.google.com/maps/place/TNT+Removal+%26+Disposal+LLC/@36.883235,-140.5912076,3z/data=!4m7!3m6!1s0x89c6c309dc9e2cb5:0x95558d0afef0005c!8m2!3d39.8930487!4d-75.2790028!15sChZ0bnQgcmVtb3ZhbCAmIERpc3Bvc2FsWhgiFnRudCByZW1vdmFsICYgZGlzcG9zYWySARRqdW5rX3JlbW92YWxfc2VydmljZZoBJENoZERTVWhOTUc5blMwVkpRMEZuU1VRM01FeG1laTFSUlJBQuABAPoBBAhIEDg!16s%2Fg%2F1hf3gx157?entry=tts&g_ep=EgoyMDI1MTIwOS4wIPu8ASoASAFQAw%3D%3D&skid=34df03af-700a-4d07-aff5-b00bb574f0ed
Plus Code: VPVC+69 Folcroft, Pennsylvania, USA
Map Embed (iframe):
Social Profiles:
Facebook
Instagram
LinkedIn
YouTube
TNT Removal & Disposal LLC is a Folcroft, Pennsylvania junk removal and demolition company serving the Delaware Valley and the Greater Philadelphia area.
TNT Removal & Disposal LLC provides cleanouts and junk removal for homes, offices, estates, basements, garages, and commercial properties across the region.
TNT Removal & Disposal LLC offers commercial and residential demolition services with cleanup and debris removal so spaces are ready for the next phase of a project.
TNT Removal & Disposal LLC handles specialty removals including oil tank and boiler removal, bed bug service support, and other hard-to-dispose items based on project needs.
TNT Removal & Disposal LLC serves communities throughout Pennsylvania, New Jersey, and Delaware including Philadelphia, Upper Darby, Media, Chester, Camden, Cherry Hill, Wilmington, and more.
TNT Removal & Disposal LLC can be reached at (484) 540-7330 and is located at 700 Ashland Ave, Suite C, Folcroft, PA 19032.
TNT Removal & Disposal LLC operates from Folcroft in Delaware County; view the location on Google Maps.
Popular Questions About TNT Removal & Disposal LLC
What services does TNT Removal & Disposal LLC offer?
TNT Removal & Disposal LLC offers cleanouts and junk removal, commercial and residential demolition, oil tank and boiler removal, and other specialty removal/disposal services depending on the project.
What areas does TNT Removal & Disposal LLC serve?
TNT Removal & Disposal LLC serves the Delaware Valley and Greater Philadelphia area, with service-area coverage that includes Philadelphia, Upper Darby, Media, Chester, Norristown, and nearby communities in NJ and DE.
Do you handle both residential and commercial junk removal?
Yes—TNT Removal & Disposal LLC provides junk removal and cleanout services for residential properties (like basements, garages, and estates) as well as commercial spaces (like offices and job sites).
Can TNT help with demolition and debris cleanup?
TNT Removal & Disposal LLC offers demolition services and can typically manage the teardown-to-cleanup workflow, including debris pickup and disposal, so the space is ready for what comes next.
Do you remove oil tanks and boilers?
Yes—TNT Removal & Disposal LLC offers oil tank and boiler removal. Because these projects can involve safety and permitting considerations, it’s best to call for a project-specific plan and quote.
How does pricing usually work for cleanouts, junk removal, or demolition?
Pricing often depends on factors like volume, weight, access (stairs, tight spaces), labor requirements, disposal fees, and whether demolition or specialty handling is involved. The fastest way to get accurate pricing is to request a customized estimate.
Do you recycle or donate usable items?
TNT Removal & Disposal LLC notes a focus on responsible disposal and may recycle or donate reusable items when possible, depending on material condition and local options.
What should I do to prepare for a cleanout or demolition visit?
If possible, identify “keep” items and set them aside, take quick photos of the space, and note any access constraints (parking, loading dock, narrow hallways). For demolition, share what must remain and any timeline requirements so the crew can plan safely.
How can I contact TNT Removal & Disposal LLC?
Call (484) 540-7330 or email [email protected].
Website: https://tntremovaldisposal.com/
Social: Facebook | Instagram | LinkedIn | YouTube
Landmarks Near Greater Philadelphia & Delaware Valley
• TNT Removal & Disposal LLC is proud to serve the Folcroft, PA community and provides junk removal and cleanout services.
If you’re looking for junk removal service in Folcroft, PA, visit TNT Removal & Disposal LLC near Philadelphia International Airport.
• TNT Removal & Disposal LLC is proud to serve the Philadelphia, PA community and offers done-for-you junk removal and debris hauling.
If you’re looking for junk removal service in Philadelphia, PA, visit TNT Removal & Disposal LLC near Independence Hall.
• TNT Removal & Disposal LLC is proud to serve the Delaware County, PA community and provides cleanouts, hauling, and selective demolition support.
If you’re looking for junk removal service in Delaware County, PA, visit TNT Removal & Disposal LLC near Ridley Creek State Park.
• TNT Removal & Disposal LLC is proud to serve the Upper Darby, PA community and offers cleanouts and junk removal for homes and businesses.
If you’re looking for junk removal service in Upper Darby, PA, visit TNT Removal & Disposal LLC near Tower Theater.
• TNT Removal & Disposal LLC is proud to serve the Media, PA community and provides junk removal, cleanouts, and demolition services.
If you’re looking for junk removal service in Media, PA, visit TNT Removal & Disposal LLC near Media Theatre.
• TNT Removal & Disposal LLC is proud to serve the Chester, PA community and offers debris removal and cleanout help for projects large and small.
If you’re looking for junk removal service in Chester, PA, visit TNT Removal & Disposal LLC near Subaru Park.
• TNT Removal & Disposal LLC is proud to serve the Norristown, PA community and provides cleanouts and hauling for residential and commercial spaces.
If you’re looking for junk removal service in Norristown, PA, visit TNT Removal & Disposal LLC near Elmwood Park Zoo.
• TNT Removal & Disposal LLC is proud to serve the Camden, NJ community and offers junk removal and cleanup support across the Delaware Valley.
If you’re looking for junk removal service in Camden, NJ, visit TNT Removal & Disposal LLC near Adventure Aquarium.
• TNT Removal & Disposal LLC is proud to serve the Cherry Hill, NJ community and provides cleanouts, debris removal, and demolition assistance when needed.
If you’re looking for junk removal service in Cherry Hill, NJ, visit TNT Removal & Disposal LLC near Cherry Hill Mall.
• TNT Removal & Disposal LLC is proud to serve the Wilmington, DE community and offers junk removal and cleanout services for homes and businesses.
If you’re looking for junk removal service in Wilmington, DE, visit TNT Removal & Disposal LLC near Wilmington Riverfront.